![]() |
1927 Chummy #4 Door catch plate - Printable Version +- Austinsevenfriends (https://www.austinsevenfriends.co.uk/forum) +-- Forum: Austin Seven Friends Forum (https://www.austinsevenfriends.co.uk/forum/forumdisplay.php?fid=1) +--- Forum: Forum chat... (https://www.austinsevenfriends.co.uk/forum/forumdisplay.php?fid=14) +--- Thread: 1927 Chummy #4 Door catch plate (/showthread.php?tid=3375) |
1927 Chummy #4 Door catch plate - Nick Salmon - 03-10-2019 Investigating of why the doors pop open at inconvenient moments when driving, I find that the catch plates are simply screwed in place over the solid metal - there is no hole/slot for the sprung catch to go into so it can fully engage. At the moment it is barely hanging on by its fingertips to the edge of the catch plate slot. I cannot see any sign of one ever having been cut. Do I cut a slot or is the catch plate incorrectly fitted? ![]() RE: 1927 Chummy #4 Door catch plate - Mike Costigan - 03-10-2019 The slot provides a secondary security catch, the door latch when fully closed should locate inside the body frame. RE: 1927 Chummy #4 Door catch plate - Nick Salmon - 03-10-2019 Ah. Thanks Mike. It is therefore a matter of adjustment because at the moment the door will not close sufficiently to allow the latch to go past the inner edge of the catch plate. RE: 1927 Chummy #4 Door catch plate - Ruairidh Dunford - 03-10-2019 You need to cut some material away from the trim board to allow it to sit more central Nick. RE: 1927 Chummy #4 Door catch plate - Nick Salmon - 03-10-2019 Thanks Ruairidh. Will do. |