The following warnings occurred:
Warning [2] Undefined property: MyLanguage::$archive_pages - Line: 2 - File: printthread.php(287) : eval()'d code PHP 8.1.28 (Linux)
File Line Function
/inc/class_error.php 153 errorHandler->error
/printthread.php(287) : eval()'d code 2 errorHandler->error_callback
/printthread.php 287 eval
/printthread.php 117 printthread_multipage



Austinsevenfriends
Magneto shaft at standstill - Printable Version

+- Austinsevenfriends (https://www.austinsevenfriends.co.uk/forum)
+-- Forum: Austin Seven Friends Forum (https://www.austinsevenfriends.co.uk/forum/forumdisplay.php?fid=1)
+--- Forum: Forum chat... (https://www.austinsevenfriends.co.uk/forum/forumdisplay.php?fid=14)
+--- Thread: Magneto shaft at standstill (/showthread.php?tid=3305)

Pages: 1 2 3

RE: Magneto shaft at standstill - Colin Reed - 21-09-2019

HI,
I am with zeto regarding the woodruff key,
and i think you will need to remove all the gears as there is damage on the crank gear .

Colin
NZ

RE: Magneto shaft at standstill - Adrian Payne - 21-09-2019

Hi
I was always taught that a key is for alignment and not for driving unless a tapered key.
The gear should be proud of the crankshaft, so when the dog is tightened the gear is clamped against the bearing and dog.
It is not a case of just buy a replacement gear as they came in different sizes and were matched to the machining of the gear case.
If the damage is just a chip on the edge then just Dremel it smooth and leave alone.
Many thanks.
Adrian.