+- Austinsevenfriends (https://www.austinsevenfriends.co.uk/forum)
+-- Forum: Austin Seven Friends Forum (https://www.austinsevenfriends.co.uk/forum/forumdisplay.php?fid=1)
+--- Forum: Forum chat... (https://www.austinsevenfriends.co.uk/forum/forumdisplay.php?fid=14)
+--- Thread: STEERING COLUMN SPLINE pics (/showthread.php?tid=2598)
Pages:
1
2
RE: STEERING COLUMN SPLINE pics - Rpm - 03-04-2019
Thanks, Charles, wasn't aware you could keep the box and change column, excellent idea. Sure someone on this site could make use of my old but, in excellent condition flat Bluemel wheel.
Rob
RE: STEERING COLUMN SPLINE pics - spannerman - 03-04-2019
Welding like that would be an mot fail ! Inappropriate welding on steering conponent good job it mot exempt or is it?
RE: STEERING COLUMN SPLINE pics - JonE - 03-04-2019
Just noticed I have this on the Nippy archive parts list:"One owner with 65 steering wheel and (longer) steering tube/box looking for a swap with later (shorter) Nippy unit for 1936 car – make contact!"
Now need to remember who it was... not that it helps you.
Wasnt Willie McKenzie doing repro Ashby wheels? Austin 7 Repro...
RE: STEERING COLUMN SPLINE pics - Zetomagneto - 03-04-2019
What do you think about fabricated wishbones, radius rods, panhard rods, spaceframe chassis, all welded, are thes MOT fails?
RE: STEERING COLUMN SPLINE pics - spannerman - 03-04-2019
Just used the mot manual for wording not saying
It's not ok I build formula 750 race cars for something
To do ! And space frame and wishbone are all made
By welding in jigs I have been welding for my working life
And have been trained to do it . But on a weld overhanging Like that and a lot of stress on it I would myself not like it my car ! Sorry