Calling AC Chummies near Herefordshire! - Printable Version +- Austinsevenfriends (https://www.austinsevenfriends.co.uk/forum) +-- Forum: Austin Seven Friends Forum (https://www.austinsevenfriends.co.uk/forum/forumdisplay.php?fid=1) +--- Forum: Forum chat... (https://www.austinsevenfriends.co.uk/forum/forumdisplay.php?fid=14) +--- Thread: Calling AC Chummies near Herefordshire! (/showthread.php?tid=2560) |
Calling AC Chummies near Herefordshire! - Dave Prior - 26-03-2019 We're hoping to find someone with an AC Chummy that we can take a look at as close to Herefordshire as possible. Specifically, we want to check the radius of the rear corners of the body to ensure our formers are correct. We already have some measurements and a curve we believe to be correct, but would like to confirm this before producing rear body hoops for the model. Any suggestions would be appreciated! RE: Calling AC Chummies near Herefordshire! - Hedd_Jones - 26-03-2019 My mate has one, the bodywork in fine fettle thanks to Mr Goodfellow up here in North Shropshire. No trim or anything inside as it is just a tub. If you get no joy let me know and I'll ask him. My brother in law is currently borrowing his traction engine RE: Calling AC Chummies near Herefordshire! - Dave Prior - 26-03-2019 Cheers Hedd, that might well be a possibility. RE: Calling AC Chummies near Herefordshire! - Mick Hobday - 26-03-2019 There's a very original one here with me Dave. RE: Calling AC Chummies near Herefordshire! - Martin Prior - 27-03-2019 Thanks, Mick. I'll email you. RE: Calling AC Chummies near Herefordshire! - Bill Sheehan - 28-03-2019 Martin I could send you a cardboard template of a '23 AB rear top edge, which I think from memory was the same as an AC. Unfortunately I accidently discarded my '25 template to check. Cheers, Bill in Oz |