Aluminium welding - Printable Version +- Austinsevenfriends (https://www.austinsevenfriends.co.uk/forum) +-- Forum: Austin Seven Friends Forum (https://www.austinsevenfriends.co.uk/forum/forumdisplay.php?fid=1) +--- Forum: Forum chat... (https://www.austinsevenfriends.co.uk/forum/forumdisplay.php?fid=14) +--- Thread: Aluminium welding (/showthread.php?tid=2442) |
Aluminium welding - Stuart Joseph - 24-02-2019 Morning all. my 1928 coil crankcase has a crack in the bell-housing. Can anyone recommend a company to repair it? Regards from the creative county - Staffordshire Stuart RE: Aluminium welding - Lowespeed - 24-02-2019 Hi Stuart, Ron Cutler, welder of Selly Oak ,Birmingham 07973 675476. Made a superb job of welding my crankcase. A crack formed just below the top surface. almost trying to pull the top out. He welded on the inside, vee'd the outside and welded it, then put a "pretty" weld on top "as it would be seen" Andy RE: Aluminium welding - Alan - 24-02-2019 Hi Stuart. I am similarly afflicted. I was going to talk with Chase Engines of Silverdale. They have done good work for me in the past and advertise a cold metal spraying process to repair aluminium. I’ll let you know how I go on. RE: Aluminium welding - Steve Jones - 24-02-2019 Probably not convenient for you but Ollie Mullard who trades as 'Olliminum' at Bicester Heritage can only be described as a 'magician' when it comes to aluminium welding; his work is truly amazing. He's the chap who is in the process of building a V8 Austin 7 engine using two A7 crankcases welded together. Steve RE: Aluminium welding - Stuart Joseph - 24-02-2019 Hello, many thanks for the replies, geographically they are all within comfortable traveling distance so I'll start making enquiries and report back. Regards Stuart RE: Aluminium welding - Charles P - 24-02-2019 Stuart What exactly is the crack in the bellhousing? I had cracks on both starter motor retaining holes which I had tigged up by a friend (who happens to work for a well known specialist restoration company) so it can be done. Charles RE: Aluminium welding - Geoff101 - 24-02-2019 (24-02-2019, 05:17 PM)Steve Jones Wrote: Probably not convenient for you but Ollie Mullard who trades as 'Olliminum' at Bicester Heritage can only be described as a 'magician' when it comes to aluminium welding; his work is truly amazing. He's the chap who is in the process of building a V8 Austin 7 engine using two A7 crankcases welded together. I'll also vouch that Ollie is a decent bloke! |