+- Austinsevenfriends (https://www.austinsevenfriends.co.uk/forum)
+-- Forum: Austin Seven Friends Forum (https://www.austinsevenfriends.co.uk/forum/forumdisplay.php?fid=1)
+--- Forum: Forum chat... (https://www.austinsevenfriends.co.uk/forum/forumdisplay.php?fid=14)
+--- Thread: Nippy Cam Bearing (/showthread.php?tid=1972)
Nippy Cam Bearing - Charles P - 04-11-2018
Can someone tell me the reference number /spec for the centre cam bearing outer race used in the 65/Nippy with a 2 bearing crank?
It's probably buried in the old site but I couldn't find it
Thanks
Charles
RE: Nippy Cam Bearing - Colin Wilks - 04-11-2018
(04-11-2018, 12:13 PM)Charles P Wrote: Can someone tell me the reference number /spec for the centre cam bearing outer race used in the 65/Nippy with a 2 bearing crank?
It's probably buried in the old site but I couldn't find it
Thanks
Charles
I shall be removing mine in the next few weeks so can let you have measurements if you don't find what you need in the interim.
RE: Nippy Cam Bearing - Tony Betts - 04-11-2018
Hi Charles,
If you can email me the specs, I beleive I have some race and rollers that came in with quarry engineerings spares.
These are what dave flake bought to build Ulster, nippy. Crankcasses with.
I only have a small number though.
Thanks Tony
RE: Nippy Cam Bearing - Chris Garner - 04-11-2018
1.625" OD
1.368"ID
0.585" width