The following warnings occurred:
Warning [2] Undefined property: MyLanguage::$archive_pages - Line: 2 - File: printthread.php(287) : eval()'d code PHP 8.1.28 (Linux)
File Line Function
/inc/class_error.php 153 errorHandler->error
/printthread.php(287) : eval()'d code 2 errorHandler->error_callback
/printthread.php 287 eval
/printthread.php 117 printthread_multipage



Austinsevenfriends
What have you done today with your Austin Seven - Printable Version

+- Austinsevenfriends (https://www.austinsevenfriends.co.uk/forum)
+-- Forum: Austin Seven Friends Forum (https://www.austinsevenfriends.co.uk/forum/forumdisplay.php?fid=1)
+--- Forum: Forum chat... (https://www.austinsevenfriends.co.uk/forum/forumdisplay.php?fid=14)
+--- Thread: What have you done today with your Austin Seven (/showthread.php?tid=1921)

Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599

RE: What have you done today with your Austin Seven - David Stepney - 15-03-2022

"David, if our railway station was still open I'd hand a spare wedged head over to the guard. After a long passage through the branch lines of wales it would reach you at Bala station in due course. "

Thank you for that kind thought, Steve. Alas, our nearest railway station is Wrexham! However, if you are serious, there are ways of collecting the head. The Seven has been down your way before.

I made enquiries of Surelock as recommended by Oxford Jack, and Nick Hood has estimated that to seal my head including all the relevant testing would be about £200.

RE: What have you done today with your Austin Seven - Malcolm Parker - 15-03-2022

Regarding the wedged low compression head, the machining alters the shape of the combustion chamber significantly.   The final shape depends on the angle that the machining is done at, also the amount that is taken off.   The three wedged heads that I have had were machined on a lathe, and all are different.   The head that was on the Pytchley was machined with 4mm difference one side to the other, I think this is about as big a wedge as you can probably go.   The thickness of the castings vary so there is always the chance that if you go too far, you may break through the head of the combustion chamber into the water jacket.   Our technique was to make several cuts and keep an eye on the shape of the combustion chamber, stopping when it looked okay.  All very unscientific.  It is amazing how the shape of the chamber develops after a certain point.   The Pytchley head ended up with a combustion chamber volume of 23.2 cc, according to my calculations, which gives a CR of about 7:1 with the gasket.  The more the angle of the wedge, the more you need to open out the stud holes in the head.
This head is going on a new engine I am finishing off for the Ulster, it will be interesting to see how it compares with the Ricardo head fitted on the present engine.

RE: What have you done today with your Austin Seven - Terry McGrath - 15-03-2022

With the low comp. head on my RF saloon, I had 30 thou and 50 thou removed to "wedge" it. It now gives lively performance and the stud-holes still clear the studs.

RE: What have you done today with your Austin Seven - JonE - 15-03-2022

Is the Ricardo repro accepted by VSCC? I thought the whole point of the wedged heads were keeping to original, and in absence of Ulster heads to use, having no other easy vintage options?

RE: What have you done today with your Austin Seven - Malcolm Parker - 15-03-2022

The Ricardo head is of a type that was available in period and is accepted bt the VSCC.  Most Austin 7's competing in trials and speed events are using them.   They are available with either 18mm or 14mm plug holes.
I would not spend £200 having a duff wedged LC head repaired when for a few quid more you could have a brand new Ricardo head.

RE: What have you done today with your Austin Seven - Nick Lettington - 15-03-2022

Steve, as an after thought, you could probably use a tiny dab of superglue to hold the bottom part of the button in place in the centre while screwing the top back on. The bond would break when you first push the button and it wouldn't interfere with operation. 

I'm sorry the photo isn't clear, but the disk with the threaded pin (excited smartie?) sits over a sprung contact as badly sketched below... a knitting needle or blunt knife may hold it whilst you tighten the button. 


.jpg   Screenshot_20220315-005216_Gallery.jpg (Size: 147.83 KB / Downloads: 437)

.jpg   Screenshot_20220315-073213_Gallery.jpg (Size: 49.77 KB / Downloads: 437)

RE: What have you done today with your Austin Seven - Steve kay - 15-03-2022

Nick, many thanks for passing on such obscure but enormously helpful information. Oh where would we be without the forum!

RE: What have you done today with your Austin Seven - Nick Lettington - 16-03-2022

(15-03-2022, 09:41 PM)Steve kay Wrote: Nick, many thanks for passing on such obscure but enormously helpful information. Oh where would we be without the forum!

You are very welcome. Obscure information is something I have plenty of. It's usefulness is often questionable.

RE: What have you done today with your Austin Seven - Steve kay - 16-03-2022

Ah Nick, are you a philosophy lecturer as well as a skilled Seven strangler? Sounds a bit like Schopenhauer to me.

RE: What have you done today with your Austin Seven - Nick Lettington - 16-03-2022

(16-03-2022, 08:00 AM)Steve kay Wrote: Ah Nick, are you a philosophy lecturer as well as a skilled Seven strangler? Sounds a bit like Schopenhauer to me.

Again, I regularly strangle my Seven, but I think skilled is probably a little generous. A scholar of philosophy maybe, but an occasionally civil engineer by day.