The following warnings occurred:
Warning [2] Undefined property: MyLanguage::$archive_pages - Line: 2 - File: printthread.php(287) : eval()'d code PHP 8.1.28 (Linux)
File Line Function
/inc/class_error.php 153 errorHandler->error
/printthread.php(287) : eval()'d code 2 errorHandler->error_callback
/printthread.php 287 eval
/printthread.php 117 printthread_multipage



Austinsevenfriends
What have you done today with your Austin Seven - Printable Version

+- Austinsevenfriends (https://www.austinsevenfriends.co.uk/forum)
+-- Forum: Austin Seven Friends Forum (https://www.austinsevenfriends.co.uk/forum/forumdisplay.php?fid=1)
+--- Forum: Forum chat... (https://www.austinsevenfriends.co.uk/forum/forumdisplay.php?fid=14)
+--- Thread: What have you done today with your Austin Seven (/showthread.php?tid=1921)

Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598

RE: What have you done today with your Austin Seven - jansens - 16-01-2019

I got the dynamo backlash down to 3 thou and also machined up some slotted bolts to hold it on. Am going to make up a pointer and make a TDC mark on the front of the engine since I realised it will be impossible to look down on the flywheel when the engine is in the car to see what the timing is doing. Am more interested to see what the timing jitter is like at idle when everything is running.

Simon

RE: What have you done today with your Austin Seven - Chris KC - 16-01-2019

(16-01-2019, 08:14 AM)jansens Wrote: I got the dynamo backlash down to 3 thou and also machined up some slotted bolts to hold it on. Am going to make up a pointer and make a TDC mark on the front of the engine since I realised it will be impossible to look down on the flywheel when the engine is in the car to see what the timing is doing. Am more interested to see what the timing jitter is like at idle when everything is running.

Simon
Simon, what did you do to limit the backlash? New gears?
I had a go at plotting my ignition advance curve before Christmas; I made a cardboard 'protractor' with the angles marked off and stuck it to the back of the block behind the flywheel, then observed the movement of the TDC mark with a strobe light. Of course you can do the same at the front of the engine but angles will be /2 so a little harder to read. I got a cheap rev counter off eBay, the sort which winds around a plug lead and costs about a fiver. This enables advance to be plotted against rpm.
It was pretty steady around idle, but by the time I got to 5000rpm the mark was jumping around within a band of about 5 degrees... I'll be interested to hear how you get on. I'm using essentially standard (well worn) A7 bits by the way - DK4A.

RE: What have you done today with your Austin Seven - jansens - 16-01-2019

I took a little off the bottom of the dynamo housing on a linisher to bring the gears closer into mesh. My feeler gauges wouldn't fit into the gaps so I cut thin strips of shim metal and used needle nosed pliers to wiggle them in between the teeth to check the clearance. Before I started it was over 10 thou. It took 4 or 5 goes of taking a little off, reassembling it all and checking to get it right.

I was going to make a little toothed pointer thing with the teeth 5 or 10 degrees apart and have a corresponding mark for TDC on the fan pulley. Similar to how they do the timing marks on the MGB. Need to make sure the pointer goes the right direction I guess!

Simon

RE: What have you done today with your Austin Seven - Roger Goldthorpe - 17-01-2019

In prepping the Liege for the Clee Hills Trial I found the off side rear indicator bulb had blown.
It was a beautiful sunny morning so out came the RP for a trip to the local motor shop and take advantage of the weather. In the few seconds between locking up the house and getting into the RP we were engulfed in a blizzard!  
Bulb bought I called at the filling station for petrol. As often happens someone drifted across to have a chat with the opening “That’s the coolest car I’ve seen today” my reply “ It may look cool but it’s freezing driving it this morning.”
The journey home was in bright sunshine but the build up of ice didn’t shift from the screen. The cold however must have suited the RP as it ran exceptionally well on the 30 mile round trip.

RE: What have you done today with your Austin Seven - Dave Mann - 19-01-2019

There I was in the right hand of a three lane dual carriageway ready to take the third exit at a traffic light controlled roundabout doing 35 mph and my foot off the go pedal practising “Das Auto im Schwung halten” as the lights were on red. I had a nice big gap in front and this Merc ambles over from the left lane and tries to fit on the same bit of road as me. Some rapid evasive action saved the day. After stopping The Merc driver comes out and accuses me of accelerating to close the gap, in A Seven! He soon shut up when the driver behind said she witnessed it all. I think I'll invest in a dash cam.

RE: What have you done today with your Austin Seven - jansens - 24-01-2019

I filled my trousers with gearbox oil.

I was reassembling my clutch without the double spring and new mousetrap springs and decided to do the mod Russell mentioned earlier in the thread while the gearbox was out. That is to add a bolt to the end of the clutch pedal shaft so you can hold it with a spanner in the car to adjust the clutch pedal position.

I didn't want to take it all apart to drill and tap the shaft on the lathe (the sensible way) since those taper pins holding the levers in place don't look like the thing to disturb. So I looked at doing it with the shaft in the box. I picked it up and carried it over to the pillar drill to see if there was any way I could mount it there to drill it. Started the trip with the gearbox full of oil, finished up with my trousers full of it!  I'd forgotten I had filled it already and with no lever in place it all fell out!

Pillar drill wouldn't work anyway so (after changing trousers) I realised you can slide the shaft far enough over into the box so the shaft drops into the casing leaving a hole. I machined up a little top hat shaped thing to fit in the hole as a drilling guide. With that in the box I could drill a pilot hole that I then slowly enlarged that going up drill sizes until I could tap it out for a 1/4 BSW bolt. I used an old oil pan bolt since it has a deep head.

[Image: main.php?g2_view=core.DownloadItem&g2_it...alNumber=2]

Even with the guide I ended up slightly off centre (I blame a blunt drill bit!) but the bolt in there works well. I did it up tight with red loctite so that's not coming out!

[Image: main.php?g2_view=core.DownloadItem&g2_it...alNumber=2]

With that done I was able to bolt the box back on the engine. The new mousetrap springs don't seem anywhere near as strong as the old ones and I was able to fit them no trouble, possibly since having done it before I now know how. The seems to be doing the job though. With just the standard clutch springs the clutch is FAR easier to depress. I can do it by hand now whereas with the double springs it was a struggle even with leg power. And now it has that odd Austin 7 on/off feel to it again which I know is correct.

Will be interesting to see when it's in the car again.

Simon

RE: What have you done today with your Austin Seven - bob46320 - 24-01-2019

I was chugging up a steepish hill in second gear this PM, when I lost all power and 'coasted' into the verge with the engine ticking over. Looked at the ammeter - OK, Oil pressure - OK, sounds - OK. Ah Ha!! foot slipped off the accelerator - Idiot.

RE: What have you done today with your Austin Seven - squeak - 24-01-2019

(24-01-2019, 06:51 PM)bob46320 Wrote: I was chugging up a steepish hill in second gear this PM, when I lost all power and 'coasted' into the verge with the engine ticking over.  Looked at the ammeter - OK, Oil pressure - OK,  sounds - OK.  Ah Ha!!  foot slipped off the accelerator - Idiot.

So funny, you must be making this up!

RE: What have you done today with your Austin Seven - nrzam - 25-01-2019

   
APJ273 in the summertime

I had my first topless trip in a sunny Aberdeenshire with my AJ tourer since Ruairidh did a complete rebuild of the engine. The engine is so much more responsive and willing with a lovely sound which is definitely best appreciated without the roof!

Thanks for a great job Ruairidh. 

Ian

RE: What have you done today with your Austin Seven - Dave Wortley - 25-01-2019

Simon, I overdid the removal of metal of dynamo housing 2 years ago on my RN. There was still backlash all the way round but obviously not enough as 150 metres from home there was an awful din from the front of the engine. I freewheeled down the hill back home and found half a dozen cam/crank gear teeth in the bottom of the timg case. Fortunately no pthe damage
Sorry, should say "timing " and "other" Fat finger syndrome.