The following warnings occurred:
Warning [2] Undefined property: MyLanguage::$archive_pages - Line: 2 - File: printthread.php(287) : eval()'d code PHP 8.1.28 (Linux)
File Line Function
/inc/class_error.php 153 errorHandler->error
/printthread.php(287) : eval()'d code 2 errorHandler->error_callback
/printthread.php 287 eval
/printthread.php 117 printthread_multipage



Austinsevenfriends
What have you done today with your Austin Seven - Printable Version

+- Austinsevenfriends (https://www.austinsevenfriends.co.uk/forum)
+-- Forum: Austin Seven Friends Forum (https://www.austinsevenfriends.co.uk/forum/forumdisplay.php?fid=1)
+--- Forum: Forum chat... (https://www.austinsevenfriends.co.uk/forum/forumdisplay.php?fid=14)
+--- Thread: What have you done today with your Austin Seven (/showthread.php?tid=1921)

Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598

RE: What have you done today with your Austin Seven - Steve kay - 26-05-2020

First in four speed boxes is indeed for people who want to drive up the side of houses, or those of us who live in Wales. I reckon that out on the road I probably use first half a dozen times a year. On each occasion I am profoundly grateful for it, the experience of stalling, or knowing when to declare an emergency which needs passenger to jump out, jam the chock under a rear wheel and then push up the remaining gradient stops being fun as the years increase and the athleticism of driver and passengers diminishes. No doubt Scottish crew with open cars have taught the kids to jump out over the back and push vigorously to maintain progress.

RE: What have you done today with your Austin Seven - Mike Costigan - 26-05-2020

As others have said, it's normal to treat the four-speed 'box as a three-speed with an emergency low first. Even cars of the 1950s could usually be driven in that manner; that's often how I drive my 1953 Lancia, and used to drive my Triumph Heralds.

RE: What have you done today with your Austin Seven - andrew34ruby - 26-05-2020

(26-05-2020, 08:20 AM)Mike Costigan Wrote: As others have said, it's normal to treat the four-speed 'box as a three-speed with an emergency low first. Even cars of the 1950s could usually be driven in that manner; that's often how I drive my 1953 Lancia, and used to drive my Triumph Heralds.

Thanks Mike. I drive my 1955 Austin like that, using first only for hill starts. I guess my seven might manage setting off in second gear better when it's properly run in, and when I'm more accustomed to the clutch. Might retarding the ignition timing help?

RE: What have you done today with your Austin Seven - "Slack Alice" Simon - 26-05-2020

The older one gets, the harder old habits are to discard.

Starting in second in our diesel Focus doesn't work, but I cannot stop myself from doing it.

RE: What have you done today with your Austin Seven - Reckless Rat - 26-05-2020

I never use 1st gear on my RP, except in extremis. The ratios of the crash box however are slightly different to those of the later synchro ones. A hill has to be seriously steep for me to even use second as the car will go up most hills in 3rd round here.

RE: What have you done today with your Austin Seven - John Mason - 26-05-2020

Having been driving from the age of 17 to 73 I have found that older cars (those designed up to the mid 1960) go up hills in higher gears then new moderns. Is this due to less gears so therefore the ratios are covered by 3 or 4 gears unlike models where it is spread over 5 or 6. Or could it be that older cars were designed with longer stroke engines giving more torque.

John Mason

RE: What have you done today with your Austin Seven - Mike Costigan - 26-05-2020

The latter, John. The 105E Anglia was the first family car, certainly in the UK, to be fitted with a 'moderrn' short-stroke engine.

RE: What have you done today with your Austin Seven - Cliff Ringrose - 26-05-2020

The long stroke of older engines had nothing to do with torque, but was all to do with the weird and wonderfull formula dreamt for road tax purposes, a case of beurocracy stifling design for decades.

RE: What have you done today with your Austin Seven - Tony Griffiths - 26-05-2020

After a busy, 3-day weekend - plus Monday - the mountain of post was delivered by Chummy. A super run out, around the Dales.

RE: What have you done today with your Austin Seven - David Stepney - 26-05-2020

The RP saloon, now having covered an indicated (1)02500 miles, I spent yesterday and the day before giving it a jolly good service and got to grips with the jobs that, whilst not urgent, nevertheless needed doing, like removing and cleaning out the kingpin grease passages. I had been concerned that, the last time I greased the kingpins, the grease came out of the brass caps and not from between the joint between the swivel axles and the front axle itself. At least i am now sure that the bottom bushes are getting their share of the grease.

Another silly job (one of several) was that, ever since I have had the car, the cover plate that goes over the window winding mechanism on the drivers door was in the bottom of the door trim. Accordingly, I pulled the trim off to find out why. As soon as I started to pull the door to bits, the reason became obvious.  The car is fitted with Hobsons 'Perfect' winder handles that have both lost the little thing that one pulls back to release them and so cannot be removed. When the car was retrimmed, probably about 40 or 50 years ago,  the door material had a hole cut into it to just allow the handle to pass through, with a bit of wiggling, whilst the front upper edges had not been glued to the doorcard, but simply folded over the top and side edge so that the plate (which had a slot cut into it) could be slid over the winder shaft. The plate must have escaped at some point and fallen down between the trim and the card. I have managed to put it back, but really and truly the winder handles will need to come off to do the job properly. The trouble is, I cannot see anyway of removing them without destroying them in the process.

If anyone else has come across this problem and has managed to overcome it, all suggestions would be gratefully received.

This morning, I took the little car over to feed the horses on road test. On the way back, I heard an occasional tinkling noise, which gradually became worse. At first i thought it was coming from under the car, but it quickly became apparent that it was coming from under the bonnet. Investigation revealed that little shards of brass had accumulated on top of the dynamo and there was a lot of play in the fan pulley bush. Fortunately, I had done most of the serious hill climbing, so I slipped the belt off and drove home.

Investigation  showed that the grease that i had religiously been pumping into the fan pulley bush was, in fact simply filling up the cavity in the fan hub itself, in spite of the fact that the radial drilling that is supposed to feed the bush itself was clear. Fortunately I had a spare pulley in my bits box and cleaned everything up, I made a paper gasket to go between the fan and the front of the pulley and liberally sealed it with silicon gasket cement, Now, when I apply grease to the nipple, it comes out of the back of the bush, so I am hopeful that the bush is now getting lubrication. I'd better order a spare, though just in case....