What have you done today with your Austin Seven - Printable Version

The following warnings occurred:

Warning [2] Undefined property: MyLanguage::$archive_pages - Line: 2 - File: printthread.php(287) : eval()'d code PHP 8.1.28 (Linux)

File	Line	Function
/inc/class_error.php	153	errorHandler->error
/printthread.php(287) : eval()'d code	2	errorHandler->error_callback
/printthread.php	287	eval
/printthread.php	117	printthread_multipage

What have you done today with your Austin Seven - Printable Version

+- Austinsevenfriends (https://www.austinsevenfriends.co.uk/forum)
+-- Forum: Austin Seven Friends Forum (https://www.austinsevenfriends.co.uk/forum/forumdisplay.php?fid=1)
+--- Forum: Forum chat... (https://www.austinsevenfriends.co.uk/forum/forumdisplay.php?fid=14)
+--- Thread: What have you done today with your Austin Seven (/showthread.php?tid=1921)

Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597

RE: What have you done today with your Austin Seven - Tony Griffiths - 07-05-2020

(05-05-2020, 09:06 AM)Dave Mann Wrote: Just completed the resurrection of a mutilated starting handle housing for a friend's 3 speed RN. He requested I made it 8.25" long to get the handle clear of the rad cowl whereas a standard 3 speed RN one is 7.25". We haven't worked out why he needs the extra inch.

We all need the extra inch...... though is odd, is it not as the car appears to be perfectly standard; correct gearbox, crankcase, etc. What on earth could have happened? Dave, tell us all how the cross pin in the starting handle is secured; for those who don't know, it's pretty ingenious.

RE: What have you done today with your Austin Seven - Parazine - 07-05-2020

Took the Chummy into town today for essential weekend shopping: Bread and Beer.

And some more Beer.....

RE: What have you done today with your Austin Seven - Dave Mann - 08-05-2020

My condolences Steve I think that's the best way although it's a shock for the relatives. Ah if you look at the engine end of an original starting handle Tony all is revealed. The end is counter bored in almost the centre of which is a nice smooth spherical depression where something has been well and truly driven into it by I suspect a press. Replicas have a pin which is a sliding fit in the hole secured by a grub screw, it has been known for the pins to fall out. Mine followed Austin's procedure.

RE: What have you done today with your Austin Seven - Tony Griffiths - 08-05-2020

(08-05-2020, 10:55 AM)Dave Mann Wrote: If you look at the engine end of an original starting handle Tony all is revealed. The end is counter bored in almost the centre of which is a nice smooth spherical depression where something has been well and truly driven into it by I suspect a press. Replicas have a pin which is a sliding fit in the hole secured by a grub screw, it has been known for the pins to fall out. Mine followed Austin's procedure.

A clever but simple idea. Dave, how deep do you think the shallow bore drilled into the end of the shaft was? Did it stop perhaps 50 tho short of the cross pin, or some other figure?

RE: What have you done today with your Austin Seven - Nick Salmon - 08-05-2020

VE Day - the village is dressed with flags and bunting so we have put the Opal on the drive. Loads of people stopping to take photos and chat - from a distance.

The sign says 'I was around for VE Day (the car, not the owner!).

RE: What have you done today with your Austin Seven - Dave Mann - 08-05-2020

4 RP shafts, I did measure it but I've had a sleep since then Tony

RE: What have you done today with your Austin Seven - Tony Griffiths - 08-05-2020

(08-05-2020, 06:10 PM)Dave Mann Wrote: 4 RP shafts, I did measure it but I've had a sleep since then Tony

Thanks, Dave, I don't have a spare one to look at. You'll have to tell us all the technique of properly locking the (loose) pin in the current replacements.

RE: What have you done today with your Austin Seven - Reckless Rat - 08-05-2020

Not exactly Austin Seven related, as the old girl is still in lock-down although we are looking forward to an outing next week if the weather holds up. I have been fiddling with my 1966 VeloSolex 3800 assisted pedal cycle/moped. I have had it for a number of years, having bought in a brocante for £60. It runs but not brilliantly, as it lacked power and wouldn't rev out. I finally discovered a partial blockage in the fuel pick up pipe which hopefully will return it to its normal electrifying performance. The Solex has a 50cc two stroke that turns the front wheel via a roller. The throttle is fully open all the time except when the front brake is applied. An interesting experience for the unwary!

RE: What have you done today with your Austin Seven - Tony Griffiths - 08-05-2020

(08-05-2020, 07:18 PM)Reckless Rat Wrote: Not exactly Austin Seven related, as the old girl is still in lock-down although we are looking forward to an outing next week if the weather holds up. I have been fiddling with my 1966 VeloSolex 3800 assisted pedal cycle/moped. I have had it for a number of years, having bought in a brocante for £60. It runs but not brilliantly, as it lacked power and wouldn't rev out. I finally discovered a partial blockage in the fuel pick up pipe which hopefully will return it to its normal electrifying performance. The Solex has a 50cc two stroke that turns the front wheel via a roller. The throttle is fully open all the time except when the front brake is applied. An interesting experience for the unwary!

My father-in-law, who worked in the continental section of British Rail, spoke fluent French and spent much time in that country told me, half jesting, that these mopeds were used extensively by the French banking system during the 1950s. When a customer wanted to transfer money from one branch to another a clerk set off on his moped across town/county clutching a wad of coloured forms. If his arrival coincided with lunchtime - and many times it did - a comfortable two hours were spent with the other bank staff. Said staff, having filled in the forms and telexed copies to head office, gave the clerk copies and off he set on his spluttering contraption back to his home bank. The next day a clerk from the receiving bank arrived (on his Velo, at lunchtime) with the forms from head office and pointed out several errors, these being corrected after a suitable lunch (with wine, of course). This pantomime would continue for several days until, at long last and after several more delightful lunch breaks, the money was transferred. BTW, did you noticed that when the Velos stopped being made they seemed to disappear from French roads overnight - just like the 2CV and Renault 4 cars.

RE: What have you done today with your Austin Seven - Steve kay - 08-05-2020

The Solex might seem to have disappeared from the roads of France, but there is a devoted group of riders of the Stinkwheel active on this side of the Channel. Whether mounted above front or rear wheels, or below the bottom bracket, a range of additional power created the cyclemotor. Motor bike manufacturers were inevitably involved; BSA, Ducati, Rudge, Vincent and JAP. Austin did not try to get involved with cyclemotors, but surprisingly perhaps, Crossley and Salmson did, less surprising might have been Trojan with the Mini Motor. The problem for anyone wanting to try Stinkwheel riding is that legislation requires a motor bike licence. Whilst there may be historic reasons for this, it is rather pointless when a modern electric bike can significantly outperform any cyclemotor, but needs no licence at all. No I don't have one, but I do have a pal who does.