06-10-2018, 03:28 AM
(05-10-2018, 05:56 PM)Howard Wright Wrote: Hi Jon
I think I got my retrim just about right (tongue in cheek about the colour)
Howard
Howard a little trick I learned when faced with wriggly piping was to expose the cord filling at the seam ENDS just enough to grab it with a pair of pliers, and tug. The piping should immediately straighten, if not completely try the other end. A loose weave such as you have can make it easier to poke the piping cord through the weave near the ends (if you have no access to the actual end),
then grab and pull . Works best if you have plastic cord filling because soft filling tends to get punched through by the needle and locked in place. Hope there's some help there, cheers Russell