Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Exhaust manifold
#1
Does anyone know who would have made this type of exhaust manifold or anyone who currently makes them.

   
   
[Only registered and activated users can see the links Click here to register]
Reply
#2
(11-07-2018, 05:00 PM)Douglas Alderson Wrote: Does anyone know who would have made this type of exhaust manifold or anyone who currently makes them.

Hi, it looks very similar to an Alan Raeburn one I bought some years ago. Not sure if they're still available.
Reply
#3
[Only registered and activated users can see the links Click here to register]
See above website, they make one, but not used them myself.
Reply
#4
Scarlet is correct it was supplied by the late Alan Raeburn.
Reply
#5
(11-07-2018, 05:30 PM)NickB Wrote: [Only registered and activated users can see the links Click here to register]
See above website, they make one, but not used them myself.

This design looks more efficient than the AR made one but not so trad.

Paul N-M
Reply
#6
May be worth looking at exhaust design (library/google) to get an idea of what pipe sizes/lengths are required for A7 then better decision can be made on which you like.

Dennis
Reply
#7
(11-07-2018, 07:06 PM)Dennis Nicholas Wrote: May be worth looking at exhaust design (library/google) to get an idea of what pipe sizes/lengths are required for A7 then better decision can be made on which you like.

Dennis

Oxfordshire Sevens produce a 4 into 1 manifold for the Ulster if that is suitable. It is probably best to call on them on    07743 263791     for details if interested.

Regards,

Jamie.
Reply
#8
Douglas, I have one of those in usable (possibly unused?) condition. If you're still looking after the summer hols drop me a mail, I'll be offline for a week or two I'm afraid.
Reply
#9
Hi all thanks for the replies, the manifold is for an A7 owner who is not on the forum so passed on the comments.  Thanks.
[Only registered and activated users can see the links Click here to register]
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)