The following warnings occurred:
Warning [2] Undefined variable $search_thread - Line: 60 - File: showthread.php(1617) : eval()'d code PHP 8.1.27 (Linux)
File Line Function
/inc/class_error.php 153 errorHandler->error
/showthread.php(1617) : eval()'d code 60 errorHandler->error_callback
/showthread.php 1617 eval




Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Front bearing removal tool 1 1/2" crank
#1
Has anyone made a front bearing removal tool as on page A5-7 of  the Austin Seven Manual but for a 1-1/2" pressure-fed crank? The web of this Speedy crank is wider than a standard crank and the standard tool as shown would not be able to push against the inner ball races. The short semi-circular recesses in the crankshaft allow only space for a drift at an angle to the crank shaft, or maybe for a modified bearing removal tool.
Otherwise I suppose I shall just use the time-honoured method of knocking out the bearing with a brass drift.
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)