The following warnings occurred:
Warning [2] Undefined variable $search_thread - Line: 60 - File: showthread.php(1617) : eval()'d code PHP 8.1.27 (Linux)
File Line Function
/inc/class_error.php 153 errorHandler->error
/showthread.php(1617) : eval()'d code 60 errorHandler->error_callback
/showthread.php 1617 eval




Thread Rating:
  • 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Clutch assembly
#1
       

Having struggled for years getting all of the springs and bits in alignment I came up with what I believe to be an ingenious idea, ( now tell me it’s not original).
Using the alignment tool as described in Woodrows and a Jubilee clip. See pictures
Clamp the assembly and compress, drop the Jubilee clip over the splines and tighten. I then use three long set screws and nuts to hold the whole thing together whilst finaly centralising the spline and tightening the six fixing bolts.
I am always interested in any information about Rosengart details or current owners.
Reply


Messages In This Thread
Clutch assembly - by Derek Sheldon - 06-11-2018, 05:23 PM
RE: Clutch assembly - by bob46320 - 06-11-2018, 06:07 PM
RE: Clutch assembly - by Derek Sheldon - 06-11-2018, 06:37 PM
RE: Clutch assembly - by Dave Wortley - 06-11-2018, 07:08 PM
RE: Clutch assembly - by Chris KC - 06-11-2018, 09:02 PM
RE: Clutch assembly - by Ruairidh Dunford - 06-11-2018, 07:23 PM
RE: Clutch assembly - by Charles Levien - 06-11-2018, 07:47 PM
RE: Clutch assembly - by Howard Wright - 06-11-2018, 08:32 PM
RE: Clutch assembly - by Charles Levien - 07-11-2018, 10:32 AM
RE: Clutch assembly - by Derek Sheldon - 06-11-2018, 07:57 PM
RE: Clutch assembly - by Ruairidh Dunford - 06-11-2018, 09:10 PM
RE: Clutch assembly - by GK5268 - 07-11-2018, 11:17 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)