All Alloy Cup progress

[AllAlloyCup]

  BA6425B9-8D53-4EB7-825B-21819B3434A4.jpeg (Size: 60.36 KB / Downloads: 3,262)

After a summer of landscaping and slab laying it’s good to
Get back to car building!

I’m halfway through reassembling the 3 Speed Box with
New close ratio gears and bearings.

Also about to build the 1 1/8th coil engine with a new steel crank, pistons, 
valves and bearings, plus newly refurbed rods.

All the alloy coachwork and alloy wings and bonnet I’ve fabricated
are finished bar the tail cover which is still work in progress.

Decisions needed on the rad core and rad shell when funds permit.

As the cold weather beckons I’m looking forward to starting the wiring.

Regards

Bill G