04-06-2018, 09:12 AM
Another thing to check with newly arriving dynomators. Mine was in a box for a different model and thus had no end protection (i.e. in transit) to either end of the unit. If yours is the same, read on.
I didn't immediately check the rotation of the spindle and another Forum member actually noticed a slight stiffness on one quadrant of the rotation which might or might not have been due to the above. This may be slightly more difficult to check now there is no end gear supplied.
Accuspark, it must be said, have been brilliant in dealing with things generally with me over new and older purchases, so as Ruairidh expressed earlier, do respect that they are doing vital development work that might otherwise not have ever been done.
I didn't immediately check the rotation of the spindle and another Forum member actually noticed a slight stiffness on one quadrant of the rotation which might or might not have been due to the above. This may be slightly more difficult to check now there is no end gear supplied.
Accuspark, it must be said, have been brilliant in dealing with things generally with me over new and older purchases, so as Ruairidh expressed earlier, do respect that they are doing vital development work that might otherwise not have ever been done.