The following warnings occurred: | |||||||||||||||
Warning [2] Undefined property: MyLanguage::$archive_pages - Line: 2 - File: printthread.php(287) : eval()'d code PHP 8.1.28 (Linux)
|
Hole in the Floor - Printable Version +- Austinsevenfriends (https://www.austinsevenfriends.co.uk/forum) +-- Forum: Austin Seven Friends Forum (https://www.austinsevenfriends.co.uk/forum/forumdisplay.php?fid=1) +--- Forum: Forum chat... (https://www.austinsevenfriends.co.uk/forum/forumdisplay.php?fid=14) +--- Thread: Hole in the Floor (/showthread.php?tid=8334) Pages:
1
2
|
Hole in the Floor - Colin Morgan - 05-02-2023 Hi, What is this round hole for, please? My car doesn't have one. RE: Hole in the Floor - john williams - 05-02-2023 It is to adjust the brake pedal height, wing nut on brake rod. Only used on Ruby based models. RE: Hole in the Floor - Colin Morgan - 05-02-2023 Thanks. My floor's been replaced with sheet steel - from the side of a fridge or similar - so this feature is missing. RE: Hole in the Floor - John Mason - 05-02-2023 On my Ruby the cover for the hole is a circular piece of wood with a shoulder machined into it to prevent it falling through the hole. I don’t know if this is standard or if a previous owner has made it. The hole under the rear seat to lubricate the bearing between torque tube and prop shaft is a metal cover. John Mason. RE: Hole in the Floor - Colin Morgan - 05-02-2023 Somewhere else water can get in? And needs a 'round tuit' to fill the hole? RE: Hole in the Floor - Duncan Grimmond - 05-02-2023 I've been on the look-out for one of them there round tuits for more years than I can remember RE: Hole in the Floor - robert regan - 05-02-2023 there is a wooden hole filler in my cabriolet it looks to have been there from new regards to all Rob. RE: Hole in the Floor - Steve kay - 05-02-2023 Good lord, if the ford is deep enough for water to enter through the brake access hatch, serious challenges are about to present themselves. RE: Hole in the Floor - Charles Levien - 06-02-2023 (05-02-2023, 05:07 PM)Duncan Grimmond Wrote: I've been on the look-out for one of them there round tuits for more years than I can remember I’ve got a lot of jobs — just don’t have time to get round tuit …………… RE: Hole in the Floor - Spex - 09-02-2023 I have a square TUIT....... For those that never get around TUIT Peter |