Ulster exhaust - Printable Version +- Austinsevenfriends (https://www.austinsevenfriends.co.uk/forum) +-- Forum: Austin Seven Friends Forum (https://www.austinsevenfriends.co.uk/forum/forumdisplay.php?fid=1) +--- Forum: Forum chat... (https://www.austinsevenfriends.co.uk/forum/forumdisplay.php?fid=14) +--- Thread: Ulster exhaust (/showthread.php?tid=2915) |
Ulster exhaust - John L - 08-06-2019 Hi, would anyone have a drawing for the Ulster exhaust can? With the pipe dimensions for either end to. If someone would be willing to email a drawing or post it I would appreciate it. John RE: Ulster exhaust - Chris KC - 08-06-2019 Not a 'drawing' as such John but I have a side view sketch, I could post or e-mail you a copy if it helps? I've just made one for my car so let me know if you'd like some suggestions about how to tackle it. Otherwise Chris Gould's book 'A Guide to Building Reproduction Austin Ulsters' is probably the best reference you are going to find. The outlet pipe is 1" OD, the tailpipe 1" ID and 1.125" OD. You'll probably need to match the inlet to your exhaust manifold. RE: Ulster exhaust - John L - 08-06-2019 Your sketch would because great help Chris. I will try to send you a PM with my email address. Appreciate it RE: Ulster exhaust - Greig Smith - 08-06-2019 I sent you a PM on the exhaust as well Chris Thanx Greig RE: Ulster exhaust - Chris KC - 08-06-2019 Messages received! Sketch on the way... |