The following warnings occurred:
Warning [2] Undefined property: MyLanguage::$archive_pages - Line: 2 - File: printthread.php(287) : eval()'d code PHP 8.1.28 (Linux)
File Line Function
/inc/class_error.php 153 errorHandler->error
/printthread.php(287) : eval()'d code 2 errorHandler->error_callback
/printthread.php 287 eval
/printthread.php 117 printthread_multipage



Austinsevenfriends
Fabric Joint Propshaft Lengths - Printable Version

+- Austinsevenfriends (https://www.austinsevenfriends.co.uk/forum)
+-- Forum: Austin Seven Friends Forum (https://www.austinsevenfriends.co.uk/forum/forumdisplay.php?fid=1)
+--- Forum: Forum chat... (https://www.austinsevenfriends.co.uk/forum/forumdisplay.php?fid=14)
+--- Thread: Fabric Joint Propshaft Lengths (/showthread.php?tid=219)

Pages: 1 2 3

RE: Fabric Joint Propshaft Lengths - JonE - 14-03-2018

little raised triangle on underside of spider of 20"; nothing at all on a 19.5"...

RE: Fabric Joint Propshaft Lengths - Douglas Alderson - 16-03-2018

Firstly not saying David K is wrong in that BP 73 and BP 93 are both 19.5" long, as who can be 100% and I suppose is why we share info

I found the prop with the part number it is hard to read but belive it is 7087 A1 so BP 73, forgot to measure it  Sad


.jpg   IMG_7683 (002).jpg (Size: 50.4 KB / Downloads: 60)

Also had a look at the index cards and noticed that the part number for BP28 is hand amended to the same as BP93.  Does this mean they are the same length?.....   Should I just give up....

   

RE: Fabric Joint Propshaft Lengths - JonE - 16-03-2018

well observed!

With the length of the carden socket being 3" or so, then one might assume that 1/2" variation could allow generic use when replacement became due.

Where should the carden blocks 'sit' in the joint/socket when fitted on level ground/car not weighted?

Perhaps we now need to measure axle to carden joint lengths on the three types of axle.