The following warnings occurred:
Warning [2] Undefined property: MyLanguage::$archive_pages - Line: 2 - File: printthread.php(287) : eval()'d code PHP 8.1.27 (Linux)
File Line Function
/inc/class_error.php 153 errorHandler->error
/printthread.php(287) : eval()'d code 2 errorHandler->error_callback
/printthread.php 287 eval
/printthread.php 117 printthread_multipage



Austinsevenfriends
What have you done today with your Austin Seven - Printable Version

+- Austinsevenfriends (https://www.austinsevenfriends.co.uk/forum)
+-- Forum: Austin Seven Friends Forum (https://www.austinsevenfriends.co.uk/forum/forumdisplay.php?fid=1)
+--- Forum: Forum chat... (https://www.austinsevenfriends.co.uk/forum/forumdisplay.php?fid=14)
+--- Thread: What have you done today with your Austin Seven (/showthread.php?tid=1921)

Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593


RE: What have you done today with your Austin Seven - Hedd_Jones - 01-04-2019

The Mk1 eyeball suffices for a scuttle tank car.


RE: What have you done today with your Austin Seven - Greig Smith - 02-04-2019

Well to be strictly correct about the title of this thread, I've done nothing on our Austin 7's, but that doesn't mean we've been resting on our laurels....

After last year's Simola Hillclimb where my friend Gino ran our green single seater 7, the bug had bitten and he stuck his head above the proverbial purchasing parapet and began to search for a suitable Simola 7. His search took him to a classic car seller in Johannesburg with pictures of a shiny red Ulster Special for sale, this turned out to have been sold more than a year before, however the vendor mentioned that it was once again for sale, but that it was rather closer to his home town. Gino took a drive over to the current owner who said yes he'd had it for a year and was rather sick & tired of battling with it and was willing to let the car go for a substantial discount just to be rid of it. Calculating that a full engine rebuild was somewhat less than the discount on offer, Gino quickly became the owner of one LWB Ulster special. Engine & chassis are '35, head is a '37, block is a '28 with brand new 60" over sized pistons and never been sleeved, 1 gallon cast aluminium oil pan. Chassis is a LWB with a curved front axle, dropped radius rods, lowered and bound springs, coupled Girling brakes with a genuine Bowdenex conversion on the fronts. Basically a nice package with all the relevant go faster bits dressed in a very pretty little aluminium body. I know the builder in Cape Town, no live Ruby was dismembered for this one, it's an amalgamation of parts from several sources over many years.

Local tuning efforts failed to produce any meaningful results so while on my way down to visit an Alfa Giulietta friend visiting Knysna from the UK, I stopped overnight in Plettenburg Bay with Gino and his family. A short drive revealed some unsorted issues, principally the oiling up of the spark plugs in less than a mile.....back into the garage & I whipped the head off & quickly determined that the bores were glazed like chrome. It turned out that 2&3 plug leads had been reversed when he had bought it and the resultant petrol washing of the bores coupled with the siamised inlets had resulted in all 4 bores being polished and the rings had never bedded in, hence the pumping of oil past the rings. This is why no past owners could ever get it to run properly...

We nipped out and bought a large stone hone and I did a very quick-and dirty in-situ hone of the top half of the cylinders & washed them out as best I could and popped the head back on - Gino managed 90 kms before the first plug oiled up, so we knew we were on the right path. 2 Weekends ago he trailered it up to us in Port Elizabeth and we set to work, head off again, the oil pan was drained & removed, the big ends were removed and the piston & rods popped out the top. The generator & distributor were removed and passed over to Dad for refurbishing and the block was then lifted off the crankcase. Gino had sourced a suitable ball hone and we set to work. 3 grinds of 30 seconds each produced a suitable cross hatch pattern in each cylinder. The block was carefully washed clean & set in the sun to dry - I repeated this process three times. The pistons were washed and the ring gaps checked & rotated. New gaskets were fitted and the block was returned to its rightful place and the pistons reinstalled. Big ends were torqued up, the oil pan was refitted as was the head. 

The next big job was the banana branch manifold which had been brazed together and then the brazing ground down to being paper thin and the manifold was breaking apart under the heat wrap. I cut off the damaged flange and sectioned the pipes to out the offending brazing. Once all trace of brazing was gone I jigged up the offending end and tacked it with the MIG. Once it was properly aligned it was seam welded into place. I guillotined suitable fillet inserts which were all duly MIG welded into place to cover the holes left by cutting out the brazing. Unlike the original welder I didn't grind down the welds in between the pipes, but rather built these areas up and ground them down flat to ensure good fillet welds between all the sections. I also took some time out to cut and shape the carburetor flange into a suitable shape. Job done it was painted with black primer and refitted. Jet hot coating will have to wait for another day. The next stage of the plan will involve a suitable Ulster pattern exhaust with a Brooklands silencer, a curved pipe ending in a pretty little fishtail above the rear mudguard like the originals.

The generator took a lot longer as a wire had come adrift internally & we ran out of weekend. Undaunted Gino returned home armed with Austin 7 books and returned to Port Elizabeth the next weekend where we continued the work. Dad had rebuilt the distributor and the SU which turned out to have a bent needle. Unfortunately none of our spare needles were suitable, so the piston & needle were set up in the lathe and using a short length of copper pipe Dad straightened the bent needle. Spinning on the lathe confirmed it was straight. While he was doing this I pulled the gear lever out and heated and bent it to stop it hitting the underside of the dash (Thanks for the Nippy gear lever thread pictures Tony). Carb rebuilt and refitted, battery connected and suddenly the car burst into life. A few tweaks, some adjustments and voila. Thanks Dad, you're a star !

I drove it to the local vintage car club's Pre '69 evening, (where it was the highlight of the display), the drive revealed 3 things, (1) the brake pedal bush was worn allowing the pedal to flop from side to side, (2) the throttle pedal is positioned too high up and (3) Gino is very lucky I didn't find it first....... 

Back in the workshop and Dad came up with several brake pedals and selected one which needed a light reamering to suit the pedal pin. Gino & I heated the shaft and re-shaped it to better suit the wedged steering. I welded a large washer on the original pedal as some bright spark had cropped the original round pedal down to a small square. Gino will re-locate the throttle pedal later as he wants to make a small floorboard change first.

With the weekend over we sent him home to his patient wife & daughter and he reported back that he  now gets 30+ mph at 5000 in 3rd, 40mph at 3300 in 4th and cruising comfortably 50mph at 4200 in 4th with 7 lbs oil pressure as the big sump keeps things cool down there. Up somewhat from the anaemic 38mph flat out in 4th when he took delivery. No oily plugs thus far, I'm pretty confident that we've solved the problem. Yes it's a bitsa, a Special, an Ulsteroid or whatever title anyone wants to use, but it's now a fantastically well sorted little car which he can use as a daily driver, fetch his daughter from school, take his wife for coffee and then blast up the hill on 3rd May.... we're in adjacent pits for the Hillclimb, because he's my main competition !!

Aye
Greig


More pics of the repairs

Forgot to mention that it's got a mechanical rev counter driven from under the distributor via an MG T Type reduction drive, this was not working and upon inspection Dad found a worn drive gear which he promptly replaced from one in his stash and the little rev counter is a real beauty now that it's working.

Aye
G


RE: What have you done today with your Austin Seven - Jays - 03-04-2019

Nothing as exciting as Greig’s.
Spent the day which was pretty cold and threatening sleet, moving the oil pressure gauge across the dash to the other side of the speedometer and covering the resultant hole with a correct patent plate. Then replacing the dodgy horn button with a more period one....the horn itself another matter, see my other post!


RE: What have you done today with your Austin Seven - agmatthews - 04-04-2019

Today I stripped off....

...all the paint on the '29 Chummy SWB chassis.

It's almost time to start putting things back together... exciting times!

Here it is almost stripped bare!

   


RE: What have you done today with your Austin Seven - David Stepney - 04-04-2019

Didn't go out in the Seven today. Definitely not Austin Seven weather!


RE: What have you done today with your Austin Seven - AustinWood - 04-04-2019

No, Sevens prefer deeper snow!


RE: What have you done today with your Austin Seven - Jamie - 04-04-2019

(04-04-2019, 06:16 AM)agmatthews Wrote: Today I stripped off....

...all the paint on the '29 Chummy SWB chassis.

It's almost time to start putting things back together... exciting times!

Here it is almost stripped bare!

May I ask what you use to remove the paint and dirt?

Regards,

Jamie.


RE: What have you done today with your Austin Seven - AllAlloyCup - 04-04-2019

Today Finally completed the metalwork and lacquering of the body tub 
and all the alloy removable panels from my Gordon England Cup project!

Now back to sorting out the Clutch and engine installation.

Regards

Bill G

aka AllAlloyCup




.jpeg   D8CEEDB2-5ACF-41EE-880A-A64A0C955068.jpeg (Size: 57.82 KB / Downloads: 420)


RE: What have you done today with your Austin Seven - David Stepney - 04-04-2019

(04-04-2019, 01:34 PM)AustinWood Wrote: No, Sevens prefer deeper snow!

Yes, but I live further from the Arctic Circle than you do.
And you ought to have seen it over the Berwyns this morning!


RE: What have you done today with your Austin Seven - Ruairidh Dunford - 04-04-2019

Took a drive over Dava Moor to see a friend and help put his petrol tank back in.