Uncoupled Brake Measurement - Printable Version +- Austinsevenfriends (https://www.austinsevenfriends.co.uk/forum) +-- Forum: Austin Seven Friends Forum (https://www.austinsevenfriends.co.uk/forum/forumdisplay.php?fid=1) +--- Forum: Forum chat... (https://www.austinsevenfriends.co.uk/forum/forumdisplay.php?fid=14) +--- Thread: Uncoupled Brake Measurement (/showthread.php?tid=1571) |
Uncoupled Brake Measurement - Charles P - 11-08-2018 If anyone has an uncoupled brake chassis sitting around I'd be grateful for a simple measurement. I'd like to know the position of the handbrake pivot mounting holes on the crossmember. Specifically how far they are below the top of the crossmember. Thanks in advance Charles RE: Uncoupled Brake Measurement - Mark Atkinson - 11-08-2018 Hello Charles, On my late 1926 chassis the distance from top of the X member to the hole centre is 1 3/4” exactly. Regards, Mark. RE: Uncoupled Brake Measurement - Charles P - 11-08-2018 Perfect. Thanks Mark |